24V 12V 60W 55W 90W Quartz Material Halogen Lamp For Automobile
Tungsten Halogen Lamps are similar in construction to conventional
gas filled tungsten filament lamps except for a small trace of
halogen (normally bromine) in the fill gas.
The halogen gas reacts with the tungsten that has evaporated,
migrated outward, and been deposited on the lamp wall. As the
quartz envelope wall reaches a temperature of approximately 250C,
the halogen reacts with the tungsten to form tungsten halide, which
is freed from the wall of the lamp and migrates back to the
filament.
The halide compound reacts at the filament where temperatures
approximating 2,500C cause the tungsten and halogen to dissociate.
The tungsten deposits onto the colder portions of the filament, and
the halogen is freed to continue the cycle.
The filament of a Tungsten Halogen Lamp has two purposes. One is to
generate light, and the second is to generate the heat necessary to
obtain a wall temperature exceeding 250C.
These lamps have been designed to maintain this required wall
temperature when operated at design voltage. A reduction of voltage
exceeding 10% from the design voltage will probably result in the
wall temperature falling below the required 250C.
Tests reveal that in most cases this reduced operating condition is
not detrimental to the operation of the lamp. By the time the wall
temperature drops to a point where the halogen cycle ceases to
function, the filament temperature has diminished to a point where
the tungsten evaporation is negligible. If wall blackening is
noticed, the operating voltage range at which this occurs should be
avoided. Burning the lamp at design voltage for a short period of
time can usually clean up lamp blackening due to temporary
operation in such a voltage range.
However, on rare occasions tungsten halogen lamps de-rated by more
than 10% could experience an adverse reaction of the corrosive
halogen attacking the tungsten filament causing premature lamp
failure. Operating Tungsten Halogen Lamps at voltages exceeding
design voltage is not recommended as the lamps are normally
designed to their maximum limits. Lamp seal temperatures must not
exceed 350C or oxidation of the molybdenum ribbon will occur
resulting in premature lamp failure.
Specification Of Quartz Halogen Bulb
Bulb Material | UV-blocking,Quartz Glass And Filaments |
Base Material | Stainless Steel |
Voltage | 13.2V,28V,12V,24V |
Installation | Plug and play |
Specification | 12v 35/35w,12V 60/55w,12v 100/55w,12v 100/90w,24v 75/70w,24v
100/90w, |
Lumious Flux | 825±15%/525±15%,900±15%/500±15%,1200±15%/700±15%,1650±15%/1000±15%,1800±15%/800±15%,1650±15%/1000±15%,1900±15%/1200±15%,2520±15%/1750±15%,2530±15%/1540±15% |
Wattage High/Low | MAX75/68,MAX110/68,MAX 84/80,MAX110/95,MAX84/80 |
Lifetime Tc/B3(H) | 300/150,500/250,600/250,700/250,700/300,800/400,1000/500,1500/700, |
Packaging | Single color paper box, plastic box, bliter cards and all customed
packagings. |
MOQ | 100 |
Application Of Quartz Halogen Bulb
Quartz Halogen Headlights
Quartz Infrared Heater Replacement Bulbs
Stage Light Halogen Bulb
Television Light Bulb
Quartz Halogen Spotlight Bulb
Halogen Projector Bulb
Tungsten Halogen Projector Lamp
Microscope Light Bulb
Aircraft Navigation Light Bulbs
Instrument Light Bulbs
Studio Lamp Halogen
Aircraft Halogen Lamp
Tungsten Halogen Lamp For Spectrophotometer
Film Light Bulbs
Movie Light Bulb
Halogen Display Optic Lamp
Halogen Photo Optic Lamp
Quartz Lamp Iodine
Marine Halogen Lights
Halogen Boat Lights
Halogen Spreader Lights
Auto Headlight Bulbs
Car Projector Headlight Bulbs
Car Headlight Bulbs
Medical Infrared Heat Lamp
Medical Light Bulbs
Surgical Lamp Light
Locomotive Headlight Bulb
Railway Train Headlamp
ETC.
Catalogue Of Quartz Halogen Bulb
| Model | Specification | Base |
| Quartz Halogen Bulb | 6.6A 45W | GX6.35 |
| Quartz Halogen Bulb | 30V 200W | G6.35 |
| Quartz Halogen Bulb | 110v 400w | SFC |
| Quartz Halogen Bulb | 120V 250W | E11 |
| Quartz Halogen Bulb | 120V 500W | G9.5 |
| Quartz Halogen Bulb | 120V 1000W | G38/G9.5 |
| Quartz Halogen Bulb | 230V 105W | E27 |
| Quartz Halogen Bulb | 230V 205W | E27 |
| Quartz Halogen Bulb | 230V250W | E27 |
| Quartz Halogen Bulb | 230V 1000W | GY9.5/G22 |
| Quartz Halogen Bulb | 240V 500W | G9.5 |
| Quartz Halogen Bulb | 240V 1000W | G9.5 |
| Quartz Halogen Bulb | 6.6A 50W 100W 150W 200W | / |
| Quartz Halogen Bulb | 6.6A 150W | / |
| Quartz Halogen Bulb | 12V 175W | / |
| Quartz Halogen Bulb | 22.8V 150W | / |
| Quartz Halogen Bulb | 24V 250W | / |
| Quartz Halogen Bulb | 28V 75W | / |
| Quartz Halogen Bulb | 30V 400W | / |
| Quartz Halogen Bulb | 80V 1200W | / |
| Quartz Halogen Bulb | 110V 350W | / |
| Quartz Halogen Bulb | 120V 750W | / |
Tips to Improve the Life Of Quartz Halogen Bulb
➊ Keep the surface of the bulb clean, and do not touch the glass
part of the bulb directly with your hands during use
If there are fingerprints, wipe with a dry cloth dipped in alcohol.
❷ Try to avoid strong vibration before and after using the bulb,
and handle it with care to avoid burning the filament.
❸ The light bulb will generate high temperature during use, so
please do not touch it with your hands, and do not use flammable
and explosive items
near.
❹ The filament is brittle just after the bulb is turned off, so
avoid vibration, do not move it immediately, and
Try to move the filament only after it has cooled down.
